The following conference proceedings can be found in the appropriate databases or can be requested on Researchgate. Simply click on the title of the paper within the citation to access the proceeding.

2019:

• Koukpaizan, N., Heathcote, D., Glezer, A., and Smith, M. J., "Numerical Simulation of Fluidic Oscillators for Flow Control,” AHS 75th Annual Forum, Philadelphia, PA, May 14–17, 2019
• Desalvo, M., Heathcote, D., Smith, M. J., and Glezer, A., “Direct Lift Control using Distributed Aerodynamic Bleed,” AIAA–2019–0075, San Diego, CA, AIAA Fluid Dynamics Conference, January 7–11, 2019
• Jarman, L., Lefebvre, J., Jones, A. R., and Smith, M. J., “Dynamics of an Airfoil Moving Through the Wake of a Circular Cylinder,” AIAA–2019–0075, San Diego, CA, AIAA Fluid Dynamics Conference, January 7–11, 2019
• Moushegian, A., Weston, C., and Smith, M. J., “Analysis of a Wing Moving Through a Nonlinear Gust (Special Session),” AIAA–2019–0637, San Diego, CA, AIAA Fluid Dynamics Conference, January 7–11, 2019

2018:

• Lefebvre, J., Jones, A. R., Jarman, L., and Smith, M. J., “Experimental and Numerical Investigation of Airfoil Performance in Cylinder Wake,” AIAA–2018–3232, Atlanta, GA, Fluid Dynamics Conference, June, 2018
• Kiviaho, J. F., Jacobson, K. E., Smith, M. J., and Kennedy, G. J., “Application of a Time-Accurate Aeroelastic Coupling Framework to Flutter-Constrained Design Optimization,” AIAA–2018–2932, Atlanta, GA, Multidisciplinary Analysis and Optimization Conference, June, 2018
• Min, B.-Y., Agarwal, S., Modarres, R., Zhao, J., Wong, J., Wake, B. E., Wilbur, I., and Smith, M. J., “Toward Improved UH-60A Blade Structural Loads Correlation,” in Proceedings of the 2018 AHS 74th Annual Forum, Phoenix, AZ, May 14-17, 2018
• Grubb, A., Castells, C., Jain, R., Richez, F., and Smith, M. J., “High Fidelity CFD Analyses of Dynamic Stall on a Four-Bladed Fully Articulated Rotor System,” in Proceedings of the 2018 AHS 74th Annual Forum, Phoenix, AZ, May 14-17, 2018
• Smith, M. J., “Large-Eddy-Simulation-Based Wind Tunnel Assessments,” in AVT-284 RWS on Advanced Wind Tunnel Boundary Simulation (Invited), Turino, IT, April, 2018
• Wilbur, I., Moushegian, A., Smith, M. J., and Whitehouse, G., “Complex Vehicle Design and Analysis with Hybrid Methodologies,” in Proceedings of the AHS Aeromechanics Design for Transformative Vertical Flight Conference, San Francisco, CA, January 16–19, 2018
• Koukpaizan, N., Wilks, A., Afman, P., and Smith, M. J., “Rapid Vehicle Aerodynamic Modeling for Use in Early Design,” in Proceedings of the AHS Aeromechanics Design for Transformative Vertical Flight Conference, San Francisco, CA, January 16–19, 2018
• Bergeron, K., Grubb, A., Wilks, A., and Smith, M. J., “Quasi-static and Prescribed Motion Simulations for Helicopter Sling Loads,” AIAA–2018–0779, Kissimmee, FL, AIAA Aerospace Sciences Meeting, CREATE-AV Special Session, January 8–12, 2018
• Koukpaizan, N. K., A., W., Grubb, A., and Smith, M. J., “Reduced-Order Modeling of Complex Aerodynamic Geometries Using Canonical Shapes,” AIAA–2018–0420, Kissimmee, FL, AIAA Modeling and Simulation Technologies Conference, January 8–12, 2018
• Grubb, A. and Smith, M. J., “Implementation and Verification of an Unstructured Transitional Hybrid RANS-LES Methodology (Special Session),” AIAA-2018-0539, Kissimmee, FL, AIAA Aerospace Sciences Meeting, January 8–12, 2018
• Jacobson, K. E., Kiviaho, J. F., Smith, M. J., and Kennedy, G. J., “An Aeroelastic Coupling Framework for Time-accurate Analysis and Optimization,” AIAA–2018–0100, Kissimmee, FL, AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, January 8–12, 2018
• Whitehouse, G., Bostitsch, A., and Smith, M. J., “A New Approach to the Integration of Computational Fluid Dynamics Tools to Promote Learning and Innovation in Aerospace Engineering,” AIAA–2018–0808, Kissimmee, FL, Paper submitted to the AIAA Science and Technology Forum and Exposition 2018, January8–12, 2018

2017:

• Afman, J. P., Koukpaizan, N. K., Grubb, A., and Smith, M. J., “An Enhanced Prediction Methodology for Rapid Performance and Control Design of Highly Maneuverable UAVs,” in Proceedings of the 43rd European Rotorcraft Forum, Milan, IT, September 12–15, 2017
• Grubb, A. and Smith, M. J., “Development and Application of Temporal Adaptation Methods to Computationally Intensive CFD Simulations,” AIAA–2017–3801, Denver, CO, AIAA Aviation and Aeronautics Forum and Exhibition, June 5–9, 2017
• Kiviaho, J. F., Jacobson, K. E., Smith, M. J., and Kennedy, G. J., “A Robust and Flexible Coupling Framework for Aeroelastic Analysis and Optimization,” AIAA–2017–4144, Denver, CO, 18th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Aviation and Aeronautics Forum and Exhibition, June 5–9, 2017
• Koukpaizan, N., Movva, J., Butori, M., and Smith, M. J., “Accurate Real-Time Extensible Simulations of Dynamic Bodies,” in Proceedings of the American Helicopter Society 73rd Annual Forum, Ft. Worth, TX, May 9-11, 2017
• Schmitz, S., Reich, D., Smith, M. J., and Centolanza, L. R., “First Rotor Hub Flow Prediction Workshop Experimental Data Campaigns and Computational Analyses,” in Proceedings of the American Helicopter Society 73rd Annual Forum, Ft. Worth, TX, May 9-11, 2017
• Reveles, N. D., Blades, E. L., Bern, N. A., and Smith, M. J., “Capability for Fully Integrated Aeroelastic Simulation of Complete Vertical Lift Configurations,” in Proceedings of the American Helicopter Society 73rd Annual Forum, Ft. Worth, TX, May 9-11, 2017
• Coder, J. G., Cross, P. A., and Smith, M. J., “Turbulence Modeling Strategies for Rotor Hub Flows,”in Proceedings of the American Helicopter Society 73rd Annual Forum, Ft. Worth, TX, May 9-11, 2017

2016:

• Smith, M. J., Jacobson, K., and Afman, J. P., “Certification of Computational Fluid Dynamics as Numerical Experiments,” in RAeS Rotorcraft Virtual Engineering Specialists Meeting, Liverpool, UK, Nov 8–10, 2016
• Jain, R., Le Pape, A., Costes, M., Richez, F., and Smith, M. J., “High-resolution CFD Predictions for Static and Dynamic Stall of a Finite-span OA209 Wing,” in 72nd AHS Annual Forum, West Palm Beach, FL, May 17–19, 2016
• Smith, L., Lind, A., Jacobson, K., Smith, M. J., and Jones, A., “Experimental and Computational Investigation of a Linearly Pitching NACA 0012 in Reverse Flow,” in 72nd AHS Annual Forum, West Palm Beach, FL, May 17–19, 2016
• Cross, P., Hodara, J., and Smith, M. J., “Evaluation of Transitional Effects in Rotorcraft Applications,” in 72nd AHS Annual Forum, West Palm Beach, FL, May 17–19, 2016
• Jacobson, K., Grubb, A., and Smith, M. J., “Aeromechanics Design With Non-Contiguous Hybrid Methodologies,” in AHS International Technical Meeting on Aeromechanics Design for Vertical Lift, San Francisco, CA, January, 2016
• Nabipour, O., Clinton, J., Ma, T., Prosser, D., and Smith, M. J., “Aerodynamic Influences on the Modeling and Simulation of Instabilities on Dynamic Tethered Loads,” AIAA Science and Technology Forum and Exposition, AIAA-2016-2141, San Diego, CA, January, 2016
• Jacobson, K. and Smith, M. J., “Performance and Physics of a S-76 Rotor in Hover With Non-Contiguous Hybrid Methodologies,” AIAA Science and Technology Forum and Exposition, AIAA-2016-0302, San Diego, CA, January, 2016

2015:

• Smith, M. J., Jain, R., Grubb, A., and Jacobson, K., “Time-and-Spatially Adapting Simulations for Efficient Dynamic Stall Predictions,” in 41st European Rotorcraft Forum, Munich, Germany, September 1–4, 2015
• Hodara, J. and Smith, M. J., “Improved Turbulence and Transition Closures for Separated Flows,” in 41st European Rotorcraft Forum, Munich, Germany, September 1–4, 2015
• Prosser, D. and Smith, M. J., “Physics-Based Aerodynamic Simulation Models Suitable for Dynamic Behavior of Complex Bluff Body Configurations,” in American Helicopter Society 71st Annual Forum, Virginia Beach, VA, May, 2015
• Hodara, J., Lind, A., Jones, A., and Smith, M. J., “Collaborative Investigation of the Aerodynamic Behavior of Airfoils in Reverse Flow,” in American Helicopter Society 71st Annual Forum, Virginia Beach, VA, May, 2015
• Quon, E. and Smith, M. J., “Advanced Data Transfer Strategies for Overset Computational Methods,” AIAA 53rd Aerospace Sciences Meeting, AIAA-2015-0566, Orlando, FL, January, 2015
• Smith, M. J., Jacobson, K., Grubb, A., Wachspress, D. A., and Whitehouse, G. R., “Evaluation of Rotor Hover Performance With Differing Blade Tip Shapes Using Carefree Hybrid Methodologies,”AIAA 53rd Aerospace Sciences Meeting, AIAA-2015-1713, Orlando, FL, January, 2015
• Prosser, D. and Smith, M. J., “Aerodynamics of Finite Cylinders in Quasi-Steady Flow,”AIAA 53rd
  Aerospace Sciences Meeting, AIAA-2015-1931, Orlando, FL, January, 2015

2014:

• Prosser, D. and Smith, M. J., “Three-Dimensional Bluff Body Aerodynamics and its Importance for Helicopter Sling Loads,” in Proceedings of the 40th European Rotorcraft Forum, Southampton, UK, Sept. 2–4, 2014
• Hodara, J. and Smith, M. J., “Improvement of Crossflow Aerodynamic Predictions for Forward Flight,” in Proceedings of the 40th European Rotorcraft Forum, Southampton, UK, Sept. 2–4, 2014
• Quon, E., Smith, M. J., Cross, P., Rosenfield, N., and Whitehouse, G., “Investigation of Ship Airwakes Using a Hybrid Computational Methodology,” in Proceedings of the 70th American Helicopter Society Forum, Montreal, Canada, May 20–22, 2014
• Reich, D., Shenoy, R., Schmitz, S., and Smith, M. J., “An Assessment of the Long-Age Unsteady Rotor Hub Wake Physics for Empennage Analysis,” in Proceedings of the 70th American Helicopter Society Forum, Montreal, Canada, May 20–22, 2014
• Prosser, D. and Smith, M. J., “A Novel, High Fidelity 6-DoF Simulation Model for Tethered Load Dynamics,” in Proceedings of the 70th American Helicopter Society Forum, Montreal, Canada, May 20–22, 2014
• Reveles, N. and Smith, M. J., “Analysis of Aeroelastic Rotors using Hybrid-CFD Techniques,” San Francisco, CA, AHS Aeromechanics Specialists Meeting, January, 2014

2013:

• Quon, E., Smith, M. J., and Whitehouse, G., “A Novel Computational Approach to High Fidelity Wind Turbine Flow Simulation,” in American Helicopter Society 69th Annual Forum, Phoenix, AZ, May 21–23, 2013
• Sharma, S., Komerath, N., and Smith, M. J., “Efficient Modeling of Dynamic Blockage Effects for Unsteady Wind Tunnel Testing,” American Helicopter Society 69th Annual Forum, Phoenix, AZ, May 21–23, 2013
• Sanchez-Rocha, M., Smith, M. J., and Menon, S., “Improved Prediction of Complex Rotorcraft Aerodynamics,” American Helicopter Society 69th Annual Forum, Phoenix, AZ, May 21–23, 2013
• Prosser, D. and Smith, M. J., “Navier-Stokes-Based Dynamic Simulations of Sling Loads,” 54th AIAA/AHS/ASME Structural Dynamics and Materials Conference, AIAA-2013-1922, Boston, MA, April, 2013

2012:

• Sharma, S., Komerath, N., Smith, M. J., and Raghav, V., “Aerodynamic Instability Modes for a Load
  Slung from a Helicopter,” in Proceedings of ASME 2012 International Mechanical Engineering Congress & Exposition IMECE 2012, Houston, Texas, ASME, November 11–14, 2012
• Komerath, N. M. and Smith, M. J., “EXTROVERT: Improving Comprehension to Innovate Across Disciplines,” in IEEE International Conference on Engineering Education: Innovative Practices and Future Trends (AICERA 2012), Kottayam, Kerala, India, July 19–21, 2012
• Smith, M. J., Lim, J. W., van der Wall, B. G., Baeder, J., Biedron, R. T., Boyd, D.D., J., Jayaraman, B., Jung, S., and Min, B.-Y., “An Assessment of CFD/CSD Prediction State-of-the-Art Using the HART II International Workshop Data,” in Proceedings of the 68th American Helicopter Society Forum and Technology Display, Fort Worth, Texas, May 1–3, 2012
• van der Wall, B. G., Lim, J. W., Smith, M. J., Jung, S., Bailly, J., Baeder, J., and Boyd, D.D., J., “An Assessment of Comprehensive Code Prediction State-of-the-Art Using the HART II International Workshop Data,” in Proceedings of the 68th American Helicopter Society Forum and Technology Display, Fort Worth, Texas, May 1–3, 2012
• Morillo, J., Ahaus, L., Reveles, N., and Smith, M. J., “Lead-Lag Stability Prediction: Why CFD is Needed,” in Proceedings of the 68th American Helicopter Society Forum and Technology Display, Fort Worth, Texas, May 1–3, 2012
• Watrin, D., Perry, T., Dimitriadis, G., and Smith, M. J., “Computational Considerations for the Prediction of Stall Flutter,” AIAA Structural Dynamics, Structures and Materials Conference, AIAA-2012-1706, Honolulu, Hawaii, April, 2012
• Ortega, F., Shenoy, R., Raghav, V., Smith, M. J., “Exploration of the Physics of Hub Drag,” AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2012-1070, Nashville, Tennessee, January 9–12, 2012
• Yabili, S., Smith, M. J., and Dimitriadis, G., “Unsteady Navier-Stokes Simulation of Low-Reynolds Stall Flutter,” AIAA 50th Aerospace Sciences Meeting and Exhibit, AIAA-2012-0037, Nashville, Tennessee, January 9–12, 2012
• Quon, E. and Smith, M. J., “Advanced Interpolation Techniques for Overset CFD,” AIAA 50th Aerospace Sciences Meeting and Exhibit, AIAA-2012-0305, Nashville, Tennessee, January 9–12, 2012
• Komerath, N. M., Smith, M. J., German, B., and Krausche, D., “Helping Aerospace Engineers Innovate Across Disciplines,” AIAA 50th Aerospace Sciences Meeting and Exhibit, AIAA-2012-0887, Nashville,
  Tennessee, January 9–12, 2012

2011:

• Komerath, N., Smith, M. J., German, B., Krausche, D. S., and Armanios, E. A., “EXTROVERT: Helping Aerospace Engineering Students Develop Advanced Concepts,” in Proceedings of the 118th American Society for Engineering Education Annual Conference and Exposition, AC 2011-2656, Vancouver, Canada, June 26–29, 2011
• Reveles, N., Smith, M. J., Zaki, A., and Bauchau, O., “A Kriging-Based Trim Algorithm For Rotor Aeroelasticity,” in Proceedings of the 37th European Rotorcraft Forum, Gallarata, Italy, September 12–15, 2011
• Shenoy, R., Smith, M. J., and Komerath, N., “Computational Investigation of Hub Drag Deconstruction from Model to Full Scale,” in Proceedings of the 37th European Rotorcraft Forum, Gallarata, Italy, September 12–15, 2011
• Moulton, M., Smith, M. J., Wong, T.-C., Le Pape, A., and Le Balleur, J.-C., “The Role of Transition Modeling in CFD Predictions of Static and Dynamic Stall,” in Proceedings of the 37th European Rotorcraft Forum, Gallarata, Italy, September 12–15, 2011
• Mantri, R., Raghav, V., Komerath, N., and Smith, M. J., “Study of Factors Driving Pitch, Roll, and Yaw Coupling in Bluff Body Aerodynamics,” AIAA 41st Fluid Dynamics Conference and Exhibit, AIAA-2011-3445, Honolulu, Hawaii, June 27–30, 2011
• Shenoy, R., Raghav, V., Ortega, F., Smith, M. J., and Komerath, N., “Deconstructing Hub Drag,” AIAA 29th Applied Aerodynamics Conference, AIAA-2011-3821, Honolulu, Hawaii, June 27–30, 2011
• Shenoy, R. and Smith, M. J., “Unstructured Overset Adaptive Mesh Refinement for Rotorcraft Aerodynamic Interactions,” in Proceedings of the 67th Annual Forum of the American Helicopter Society, Virginia Beach, Virginia, May 2–5, 2011
• Quon, E. W., Smith, M. J., Whitehouse, G. W., and Wachspress, D. A., “Hierarchical Variable Fidelity Methods for Rotorcraft Aerodynamic Design and Analysis,” in Proceedings of the American Helicopter Society 67th Annual Forum, Virginia Beach, Virginia, May 3–5, 2011
• Mantri, R., Raghav, V., Komerath, N., and Smith, M. J., “Stability Prediction of Sling Load Dynamics Using Wind Tunnel Models,” in Proceedings of the 67th American Helicopter Society Annual Forum, Virginia Beach, Virginia, May 2–5, 2011
• Heeg, J., Ballmann, J., Bhatia, K., Blades, E., Boucke, A., Chwalowski, P., Dietz, G., Dowell, E., Florance, J., Hansen, T., Mani, M., Mavriplis, D., Perry, B., Ritter, M., Schuster, D., Smith, M. J., Taylor, P., Whiting, B., and Wieseman, C., “Plans For An Aeroelastic Prediction Workshop,” in Proceedings of the International Forum of Aeroelasticity and Structural Dynamics, 2011-110, Paris, France, June, 2011

2010:

• Komerath, N. and Smith, M. J., “EXTROVERT: System for Learning Across Disciplines,” in Proceedings of the 117th American Society for Engineering Education Annual Conference and Exposition, AC 2010-2255, Louisville, Kentucky, June 13–16, 2010
• Moulton, M. and Smith, M. J., “The Prediction and Validation of Static and Dynamic Stall,” in Proceedings of the AHS International Meeting on Advanced Rotorcraft Technology and Safety Operations, Ohmiya, Japan, November 1–3, 2010
• de Montaudouin, J., Heo, S., Smith, M. J., and Bauchau, O. A., “Aerodynamic and Aeroelastic Analysis of Rotors at High Advance Ratio,” in Proceedings of the 36th European Rotorcraft Forum, Paris, France, September 7–9, 2010
• Whitehouse, G. R., Boschitsch, A. H., Smith, M. J., Lynch, C. E., and Brown, R. E., “Investigation of Mixed Element Hybrid Grid-Based CFD Methods for Rotorcraft Flow Analysis,” in Proceedings of the American Helicopter Society 66th Annual Forum, Phoenix, Arizona, May 11–13, 2010
• Cook, J., and Smith, M. J., “An Evaluation of the Influence of the Test Facility on Rotor Performance Characteristics,” in Proceedings of the American Helicopter Society 66th Annual Forum, Phoenix, Arizona, May 11–13, 2010
• Reveles, N., Zaki, A., Smith, M. J., and Bauchau, O. A., “Using Tightly Coupled CFD/CSD Simulation for Rotorcraft Stability Analysis,” in Proceedings of the American Helicopter Society 66th Annual Forum, Phoenix, Arizona, May 11–13, 2010
• Raghav, V., Richards, P., Komerath, N., and Smith, M. J., “An Exploration of the Physics of Dynamic Stall,” in Proceedings of the AHS Aeromechanics Specialists Meeting, San Francisco, California, January 22–14, 2010
• Stone, C., Lynch, C., and Smith, M. J., “Hybrid RANS/LES Simulations of a Horizontal Axis Wind Turbine,” AIAA 48th Aerospace Sciences Meeting and Exhibit, AIAA-2010-0459, Orlando, Florida, January 4–7, 2010
• Liggett, N. and Smith, M. J., “Cavity Flow Assessment Using Advanced Turbulence Modeling,” in AIAA 48th Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, AIAA-2010-1200, Orlando, Florida, January 4–7, 2010

2009:

• Komerath, N. and Smith, M. J., “Financial Assistance for Success in Technology: CSEMS in a Top-Ten Public Engineering Program,” in Proceedings of the 116th American Society for Engineering Education Annual Conference and Exposition, Austin, Texas, June 14–17, 2009
• Raghav, V., Smith, M. J., and Komerath, N., “Three-Dimensional Features of the Stalled Flowfield of a Rotor Blade in Forward Flight,” in Proceedings of the 2nd International Forum on Rotorcraft Multidisciplinary
  Technology, Seoul, Korea, October 19–20, 2009
• Smith, M. J., Koukol, B., Quackenbush, T., and Wachspress, D. A., “Reverse- and Cross-Flow Aerodynamics for High Advance-Ratio Flight,” in Proceedings of the 35th European Rotorcraft Forum, Hamburg, Germany, September 22–25, 2009
• Smith, M. J., Shenoy, R., Kenyon, A. R., and Brown, R. E., “Vorticity-Transport and Unstructured RANS Investigation of Rotor-Fuselage Interactions,” in Proceedings of the 35th European Rotorcraft Forum, Hamburg, Germany, September 22–25, 2009
• Potsdam, M., Smith, M., and Renaud, T., “Unsteady Computations of Rotor-Fuselage Interaction,” in
  Proceedings of the 35th European Rotorcraft Forum, Hamburg, Germany, September 22–25, 2009
• Komerath, N. and Smith, M. J., “Rotorcraft Wake Modeling: Past, Present, and Future,” in Proceedings of the 35th European Rotorcraft Forum, Hamburg, Germany, September 22–25, 2009
• Smith, M. J., “CFD For Rotor Wakes,” in Proceedings of the 117th American Society for Engineering Education Annual Conference and Exposition, AC 2010-2255, Louisville, Kentucky, June 13–16, 2010
• Thepvongs, S., Cook, J. R., Cesnik, C. E. S., and Smith, M. J., “Computational Aeroelasticity of Rotating Wings with Deformable Airfoils,” in Proceedings of the Army Research Office Rotorcraft Wake Prediction Basic Research Workshop, Georgia Institute of Technology, Atlanta, GA, March, 2009
• Liu, L., Padthe, A., Friedmann, P., Quon, E., and Smith, M., “Unsteady Aerodynamics of Flapped Airfoils and Rotors Using CFD and Approximate Methods,” in Proceedings of the American Helicopter Society
  65th Annual Forum, Grapevine, Texas, May 27–29, 2009
• Stone, C., Barone, M., Lynch, C. E., and Smith, M. J., “A Computational Study of the Aerodynamics and Aeroacoustics of a Flatback Airfoil Using Hybrid RANS-LES,” AIAA 47th Aerospace Sciences Meeting and Exhibit, AIAA-2009-0273, Orlando, Florida, January 5–8, 2009

2008:

• Komerath, N. M. and Smith, M. J., “Partnership for Mentoring: The Georgia Institute of Technology CSEMS Program At Age Six,” in Proceedings of the 115th Annual American Society for Engineering Education Annual Conference and Exposition, AC 2008-337, Pittsburgh, Pennsylvania, June 22–25, 2008
• Smith, M. J., “On the Conservation of CFD-CSD Coupling,” in Proceedings of the 34th European Rotorcraft Forum, Liverpool, United Kingdom, September 16–18, 2008
• Lynch, C. E. and Smith, M. J., “Hybrid RANS-LES Turbulence Models on Unstructured Grids,” in Proceedings of the 38th AIAA Fluid Dynamics Conference and Exhibit, AIAA-2008-3854, Seattle, WA, June 23–26, 2008
• Shelton, A. B., Smith, M. J., and Zhou, H. M., “A Multi-Resolution Discontinuous Galerkin Method for Unsteady Flows,” AIAA 38th Fluid Dynamics Conference and Exhibit, AIAA-2008-4140, Seattle, Washington, June 23–26, 2008
• Abras, J. N. and Smith, M. J., “Rotorcraft Simulations Using Unstructured CFD-CSD Coupling,” in Proceedings of the American Helicopter Society Aeromechanics Specialists Meeting, San Francisco, California, January 23–25, 2008

2007:

• Abras, J. N. and Lynch, C. E. and Smith, M. J., “Advances in Rotorcraft Simulations with Unstructured CFD,” in Proceedings of the American Helicopter Society 63rd Annual Forum, Virginia Beach, Virginia, May 1–3, 2007

2006:

• Abras, J. N., Smith, M. J., and Bauchau, O. A., “Rotor Airload Predictions Using Coupled Finite Element and Free Wake Methods,” in Proceedings of the American Helicopter Society 62nd Annual Forum, Phoenix,
  Arizona, May 9–11, 2006
• Shelton, A. B., Braman, K., Smith, M. J., and Menon, S., “Improved Turbulence Modeling for Rotorcraft,” in Proceedings of the American Helicopter Society 62nd Annual Forum, Phoenix, Arizona, May 9–11, 2006
• Duque, E., Sankar, L., Menon, S., Bauchau, O., Ruffin, S., Smith, M., Ahuja, K., Brentner, K., Long, L., Morris, P., and Gandhi, F., “Revolutionary Physics-Based Design Tools for Quiet Helicopters,” AIAA 44th Aerospace Sciences Exhibit and Conference, AIAA-2006-1068, Reno, Nevada, January 9–12, 2006

2005:

• O’Brien, Jr, D. M. and Smith, M. J., “Understanding the Physical Implications of Approximate Rotor Methods Using an Unstructured CFD Method,” in Proceedings of the American Helicopter Society 61st Annual Forum, Grapevine, Texas, June 1–3, 2005
• Shelton, A., Abras, J., Hathaway, B., Sanchez-Rocha, M., Smith, M., and Menon., S., “An Investigation of the Numerical Prediction of Static and Dynamic Stall,” in Proceedings of the American Helicopter Society 61st Annual Forum, Grapevine, Texas, June 1–3, 2005
• O’Brien, Jr, D. M. and Smith, M. J., “Improvements in the Computational Modeling of Rotor / Fuselage Interactions Using Unstructured Grids,” in Proceedings of the American Helicopter Society 61st Annual Forum, Grapevine, Texas, June 1–3, 2005
• O’Brien, Jr, D. M. and Smith, M. J., “Analysis of Rotor - Fuselage Interactions Using Various Rotor Models,”AIAA 43rd Aerospace Sciences Meeting, AIAA-2005-0468, Reno, Nevada, January 10–13, 2005
• Shelton, A., Abras, J., Jurenko, R., and Smith, M. J., “Improving the CFD Predictions of Airfoils in Stall,” AIAA 43rd Aerospace Sciences Meeting and Exhibit, AIAA-2005-1227, Reno, Nevada, January 10–13, 2005

2004:

• Shelton, A., Tomar, A., Prasad, J., Smith, M. J., and Komerath, N., “Mentoring Students to Technology Careers,” in Proceedings of the
  111th American Society for Engineering Education Annual Conference and Exposition, 2004-1228, Salt Lake
  City, Utah, June 20–23, 2004
• Komerath, N. M. and Smith, M. J., “Active Multiple Winglets for Improved UAV Performance,” AIAA 22nd Applied Aerodynamics Conference, AIAA-2004-4968, Providence, Rhode Island, August 16–19, 2004
• Renaud, T., Potsdam, M., O’Brien Jr., D. M., and Smith, M. J., “Evaluation of Isolated Fuselage and Rotor-Fuselage Interaction Using CFD,”in Proceedings of the American Helicopter Society 60th Annual Forum, Baltimore, Maryland, June 7–10, 2004
• Smith, M. J., Potsdam, M., Wong, T., Baeder, J. D., and Phanse, S., “Evaluation of Computational Fluid Dynamics to Determine Two-Dimensional Airfoil Characteristics for Rotorcraft Applications,” in Proceedings of the American Helicopter Society 60th Annual Forum, Baltimore, Maryland, June 7–10, 2004
• Ruffin, S. M., O’Brien, D. M., Smith, M. J., Hariharan, N. S., Lee, J. D., and Sankar, L., “Comparison of Rotor-Airframe Interaction Utilizing Overset And Unstructured Grid Techniques,” AIAA 42nd Aerospace Sciences Exhibit and Conference, AIAA-2004-0046, Reno, Nevada, January 5–8, 2004

2003:

• O’Brien, D. M. and Smith, M. J., “Development of Rotor-Fuselage Unstructured Methods,” in Proceedings of the ARO International Aeroelasticity Workshop, Atlanta, Georgia, November 3–4, 2003

2002:

• Smith, M. J., “A Building Block Approach to Dynamics,” in Proceedings of the 109th American Society for Engineering Education Annual Conference and Exposition, 2058, Montreal, Canada, June 16–19, 2002
• Smith, M. J. and Komerath, N. M., “Learner Adaptation to Digital Libraries by Engineering Students,” in Proceedings of the 109th American Society for Engineering Education Annual Conference and Exposition, 2202, Montreal, Canada, June 16–19, 2002
• Zachary, A., Laurita, M. J., Smith, M. J., and Lewis, A., “Numerical Analysis Of Cylindrical Shells,” AIAA Structural Dynamics and Materials Conference, AIAA-2002-1288, Denver, Colorado, April 22–25, 2002

2001:

• Smith, M. J. and Komerath, N. M., “The Virtual Laboratory: Technology Enhancement for Engineering
  Education,” in Proceedings of the 108th American Society for Engineering Education Annual Conference and Exposition, 2602-0444, Albuquerque, New Mexico, June 24–27, 2001
• Smith, M. J. and Komerath, N. M., “Aerospace Engineering: Integrator for Cross-Disciplinary Learning,” in Proceedings of the 108th American Society for Engineering Education Annual Conference and Exposition, 3202-0450, Albuquerque, New Mexico, June 24–27, 2001
• Komerath, N. and Smith, M. J., “Integrated Knowledge Resources for Cross-Disciplinary Learning,” in Proceedings of the International Conference of Engineering Education, Trondheim, Norway, August, 2001
• Smith, M. J., Li, Y., and Loewy, R. G., “Development of Unsteady Aerodynamic Prediction Techniques for High-Solidity Fans,” in Proceedings of the American Helicopter Society 57th Annual Forum, Washington, DC, May 9–11, 2001
• Smith, M. J., Patil, M. J., and Hodges, D. H., “CFD-Based Analysis of Nonlinear Aeroelastic Behavior of High-Aspect Ratio Wings,” AIAA Structural Dynamics and Materials Conference, AIAA-2001-1582, Seattle, Washington, April 16–19, 2001
• Smith, M. J., Komerath, N. M., Ames, R., Wong, O., and Pearson, J., ““Performance Analysis Of A Wing With Multiple Winglets,”AIAA 19th Applied Aerodynamics Meeting, AIAA-2001-2407, Anaheim, California,

2000:

• Komerath, N., Smith, M. J., and Bodo, B., “Learning Across Disciplines: Aerospace Digital Library,” in Proceedings of the 107th American Society for Engineering Education Annual Conference and Exposition, 2793, St. Louis, Missouri, June, 2000
• Smith, M. J. and Komerath, N., “Learning More From Class Time: Technology Enhancement in the Classroom,” in Proceedings of the 107th American Society for Engineering Education Annual Conference and Exposition, 3202, St. Louis, Missouri, June, 2000

li>Mauermann, T. and Smith, M. J., “Numerical Simulation of Tail Buffet Sources on an F-15-like Wing,” AIAA Computational Fluid Dynamics Conference, AIAA-2000-2339, Denver, Colorado, June, 2000

• Laurita, M. J., Smith, M. J., and Bauchau, O. A., “Aeroelastic Considerations for CSD-CFD Coupling,” in Proceedings of the American Helicopter Society Aeromechanics Specialists Meeting, Atlanta, Georgia, November 13–15, 2000
• Yang, Z., Smith, M. J., Bauchau, O. A., and Sankar, L. N., “A Hybrid Analysis for Rotors in Forward Flight,” in Proceedings of the American Helicopter Society Aeromechanics Specialists Meeting, Atlanta, Georgia, November 13–15, 2000
• Yang, Z., Sankar, L. N., Smith, M. J., and Bauchau, O. A., “Recent Improvements to a Hybrid Method for Rotors in Forward Flight,” AIAA 38th Aerospace Sciences Meeting and Exhibit, AIAA-2000-0260, Reno, Nevada, January 10–13, 2000

1999:

• Smith, M. J., Bailey, R., and Deltete, M., “A Comparison of Turbulence Models for Aeroelastic Applications,” AIAA 17th Applied Aerodynamics Conference, AIAA-1999-3158, Norfolk, Virginia, June 18–July 1, 1999
• Smith, M. J. and Huttsell, L. J., “Computational Evaluation Of Semispan Straked Delta Wing Flowfields Conducive To LCO,” AIAA 44th Structural Dynamics and Materials Conference, AIAA-1999-1212, St. Louis, Missouri, April, 1999

1998:

• Smith, M. J. and Lewis, A. P., “Euler/Navier-Stokes Aeroelastic Analysis for Shell Structures,”AIAA-1998-2656, Albuquerque, New Mexico, June, 1998

1996:

• Smith, M. J., Cesnik, C. E. S., Hodges, D. H., and Moran, K. J., “An Evaluation Of Computational Algorithms To Interface Between CFD And CSD Methodologies,”AIAA/ASME/ASCE/AHS/ASC 37th Structural Dynamics and Materials Conference, AIAA-1996-1400, Salt Lake City, Utah, April 15–17, 1996

1995:

• Smith, M. J., “Computational Considerations of an Euler/Navier-Stokes Aeroelastic Method for a Hovering Rotor,”AIAA 33rd Aerospace Sciences Meeting and Exhibit, AIAA-1995-0189, Reno, Nevada, January 9–12, 1995
• Smith, M. J. and Hodges, D., “Development of an Euler/Navier-Stokes Aeroelastic Method for a Hovering Rotor,”in Proceedings of the American Helicopter Society 51st Annual Forum, Ft. Worth, Texas, May 9–11, 1995
• Smith, M. J., Huttsell, L., Schuster, D. M., and Vadyak, J., “Status on the Development of an Euler/Navier-Stokes Aeroelastic Method for Three-Dimensional Vehicles with Multiple Flexible Surfaces,” Proceedings of the Ames Computational Aerosciences Workshop, Mountain View, California, March, 1995

1993:

• Stoker, R. and Smith, M. J., “An Evaluation of Finite Volume Direct Simulation and Perturbation Methods in CAA Applications,”AIAA 31st Aerospace Sciences Meeting and Exhibit, AIAA-1993-0151, Reno, Nevada, January, 1993
• Smith, M. J. and Stoker, R., “Extension of CFD Techniques to Computational Aeroacoustics (CAA): A Comparative Evaluation,”AIAA 31st Aerospace Sciences Meeting and Exhibit, AIAA-1993-0151, Reno, Nevada, January, 1993

1991:

• Smith, M. J. and Sankar, L. N., “Evaluation of a Fourth-Order Compact Operator Scheme for Euler/Navier-Stokes Simulations of a Rotor in Hover,”AIAA 29th Aerospace Sciences Meeting, AIAA-1991-0766, Reno, Nevada, January 7–10, 1991

1990:

• Smith, M. J. and Hassan, A., “Improvements to Helicopter 2-D Airfoil Design Using CFD Methodology,”in AHS Vertical Lift Aircraft Design Specialists’ Meeting, San Francisco, California, January, 1990

1989:

• Janikaram, R., Smith, M. J., and Tadghighi, H., “Importance of Engine as a Source of Helicopter External Noise,”AIAA 12th Aeroacoustics Conference, AIAA-1989-1147, San Antonio, Texas, April, 1989

1988:

• Glidewell, S., Smith, M. J., and Larson, C., “Development of a Non-Cooperative Target Recognition System Based on Aircraft Vortex Analysis,”AIAA/AHS/ASEE Aircraft Design, Systems and Operations Conference, AIAA-1988-4407, Atlanta, Georgia, September, 1988

1987:

• Vadyak, J., Smith, M. J., and Schuster, D. M., “Simulation of External Flowfields Using a Three-Dimensional Euler/Navier-Stokes Algorithm,” AIAA 25th Aerospace Sciences Meeting, AIAA-1987-0484, Reno, Nevada, January, 1987
• Vadyak, J., Smith, M. J., Schuster, D. M., and Weed, R., “Navier-Stokes Simulations of Supersonic Fighter In-
  take Flowfields,” AIAA/SAE/ASME/ASEE 23rd Joint Propulsion Conference, AIAA-1987-1752, San Diego, California, June, 1987

1986:

• Vadyak, J. and Smith, M. J., “Simulation of External Flowfields Using a Three-Dimensional Euler/Navier-Stokes Algorithm,” AIAA-1986-1537, Huntsville, Alabama, AIAA/ASME/SAE/ASEE 22nd Joint Propulsion Conference, June, 1986

1983:

• Smith, M. J., Allen, R. G., and King, J. W., “Continued Development of DME for Real-Time Spatial Positioning in Military Aircraft Testing,” in Proceedings of the 14th Annual Society of Flight Test Engineers Symposium, Newport Beach, California, August, 1983